> I thought at one time I scaled a drawing down and the dimensions did not change in value. Then again, paper space would save this hassle, but that's another story. 001 within the PRIMARY UNITS folder After the above is done change the tab to paper space. If you need to change the units to meters instead of millimeters, use the dimension style dialog box in which you can schange the scale factor to.
2 I then save the dimĪs a 'new style' and call it 'half size on 1-10'. Second option is a line commande : zoom ->scale ->NXP1/100 and the drawing will be to scale. Put a dimension on it, change theĭims properties in the 'Dim scale linear' box to. you have anĮnlarged detail on your drawing, it's on a 1-10 drawing but it's scaled To show, but allow for the scaling you have done. Save this as a 'new style', then after you have scaled yourĭrawing you can use this style and apply dims that reflect what you want Using the properties of the dim, under primary units, alter 'Dim scale The initial value of MSLTSCALE is 1 (after 2008) CELTSCALE Current Element LineType Scale Sets the current object linetype scaling factor. joining arcs and polylines undesirably creates splines 1Įxploding the dimension will have the effect you are talking about.Įdit the dimension, take out the or the numbers and type the numbers Note: MSLTSCALE is set to 0 when you open drawings created in AutoCAD 2007 and earlier.Graphics card supporting AutoCAD LT 2022 1.This was the preferred method for complex, multiple-view drawings prior to the 2002 products. Dimension in model space for printing or plotting in paper space. For example, if the plot scale is 1/4, set DIMSCALE to 4. Controls the linetype scaling of objects displayed in paper space viewports. Although the Results drawings are mostly the.
Autocad lt 2007 scaling download#
If you need the drawings for the exercises, you should download both the Drawings and the Results sets of drawings. On the books CD-ROM, they are contained in the Drawings and the Results folders.
To create dimensions that are scaled correctly for printing or plotting, set the DIMSCALE system variable to the inverse of the intended plot scale. <0> Linetypes displayed on the Model tab are not scaled by the annotation scale <1> Linetypes displayed on the Model tab are scaled by the annotation scale Note: MSLTSCALE is set to 0 when you open drawings created in AutoCAD 2007 and earlier. These are the drawings used for the Step-by-Step exercises in AutoCAD 2007 & AutoCAD LT 2007 Bible.
0 kommentar(er)
